Intel AXXSW1GB, Руководство пользователя

Страница: 48 / 220

Intel® Gigabit Ethernet Switch AXXSW1GB User Guide 35
5
Aggregating Ports
Link Aggregation optimizes port usage by linking a group of ports together to form a
single LAG. Aggregating ports multiplies the bandwidth between the devices, increases
port flexibility, and provides link redundancy.
The device supports both static LAGs and Link Aggregation Control Protocol (LACP)
LAGs. LACP LAGs negotiate aggregating port links with other LACP ports located on a
different device. If the other device ports are also LACP ports, the devices establish a
LAG between them. Ensure the following:
•
All ports within a LAG must be the same media type.
•
A VLAN is not configured on the port.
•
The port is not assigned to a different LAG.
•
The port is in full-duplex mode.
•
All ports in the LAG have the same ingress filtering and tagged modes.
•
All ports in the LAG have the same flow control modes.
•
All ports in the LAG have the same priority.
•
All ports in the LAG have the same transceiver type.
•
The device supports up to 10 LAGs, and eight ports in each LAG.
•
Ports can be configured as LACP ports only if the ports are not part of a previously
configured LAG.
•
Ports added to a LAG lose their individual port configuration. When ports are
removed from the LAG, the original port configuration is applied to the ports.
•
LAGs can be configured only on external ports.
This section contains the following topics:
•
Configuring LAGs
•
Defining LAG Members
•
Configuring LACP
•
Configuring Virtual Trunk Group Failover