Intel AP440FX Скачать руководство пользователя страница 63

Страница: 63 / 74

Motherboard BIOS and Setup Utility

3.14.8.8 Memory Error Detection

Sets the type of error detection or correction. The options are:

•

Disabled (default)

•

ECC

•

Parity

This field appears if either ECC or Parity SIMMs are detected. Parity and ECC SIMMs can be
configured to run either as Parity or ECC (e.g. Parity SIMMs may be configured to run in ECC
mode.)

3.14.8.9 Bank

Reports the type of memory found in the Bank 0 SIMM slots. There are no options.

3.14.8.10 Bank

Reports the type of memory found in the Bank 1 SIMM slots. There are no options.

3.14.9 Power Management Configuration Subscreen

This section describes the options available on the Power Management Subscreen.

3.14.9.1 Advanced Power Management (APM)

Enables or disables the APM support in your computer’s BIOS. The options are:

•

Disabled

•

Enabled (default)

Power Management only works with APM-capable operating systems to manage power
consumption in your computer.

3.14.9.2 IDE Drive Power Down

Spins down IDE drives when the computer goes into power managed mode. The options are:

•

Disabled

•

Enabled (default)

This field does not appear if APM is disabled.

3.14.9.3 VESA Video Power Down

Sets any VESA compliant monitor to be power managed when the computer goes into power
managed mode. The options are:

•

Disabled

•

Standby

•

Suspend

•

Sleep (default)

This field does not appear if APM is disabled.

Содержание AP440FX











































































Результаты поиска

Содержание AP440FX

Отзывы:

Похожие инструкции для AP440FX

Бренды по названию

Популярные бренды

Intel AP440FX, Технические характеристики продукции

Результаты поиска

Содержание AP440FX

Отзывы:

Похожие инструкции для AP440FX

Бренды по названию

Популярные бренды