Installation Guide for POC Board
12
Intel
®
852GM Small Form Factor Proof-of-Concept Board User’s Manual
4. Verify installed hardware. Make sure the following hardware is populated on your POC
board:
•
One Onboard Intel
®
Celeron
®
M processor 1.3 GHz, mFCBGA479 package
•
BIOS FWH
•
Battery
•
Heatsink
Note:
If the above hardware is not installed correctly, DO NOT apply power to the board.
Correctly re-install the components before proceeding.
5. Install memory. Install the SO-DIMM in memory slot DIMM1. Insert the SO-DIMM above
the slot (the DIMM is keyed so that it only fits in the slot in one orientation). Firmly, but
carefully, insert the SO-DIMM into the slot until the tabs close.
Table 3.
Jumper Settings
Jumper
Function
Default Setting
J1
Clear CMOS
1-2 Normal
J2
LCD Voltage Selection
1-2 +5 V
J3
COM2 RS-232/422/485 Mode Selection - 1
1-2 RS232
J4
COM2 RS-232/422/485 Mode Selection - 1
1-2 RS232
J5
COM2 RI/+5V/+12V Selection
5-6 RI
Figure 3.
Assembled Board, Front View
