Intel 3100C - SERVICE, Руководство по обслуживанию

Страница: 30 / 54

27
Installation Procedures
Installing/Upgrading a processor
The notebook computer supports an Intel Pentium !!! processor of 500 MHz, 550 MHz, and 600
MHz core frequencies.
Two CPU types are suitable for this machine, FC-PGA 370 and PPGA-370. The processors vary
in height and depending on the processor type you may have to replace the 4 hex studs on the
mainboard.
The mainboard can support a FC-PGA370 type processor without adding the new hex studs.
If you would like to use a PPGA-370 type processor you will need to add new hex studs which is
explained in this chapter.
Note: Remember to wear an antistatic wrist strap when adding or replacing the processor.
The 5 basic steps to Installing/Upgrading a processor are:
1) Remove the heat sink
2) Remove the existing processor
3) Replace the HEX STUDS (if you are installing a PPGA-370 type processor)
4) Install a new processor
5) Install the heat sink