Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011 страница 18 Скачать руководство пользователя

Страница: 18 / 134

Package Mechanical & Storage Specifications

Thermal/Mechanical Specifications and Design Guidelines

2.2

Processor Storage Specifications

Table 2-4

includes a list of the specifications for device storage in terms of maximum

and minimum temperatures and relative humidity. These conditions should not be
exceeded in storage or transportation.

Notes:

Refers to a component device that is not assembled in a board or socket that is not to be electrically

connected to a voltage reference or I/O signals.

Specified temperatures are based on data collected. Exceptions for surface mount reflow are specified in by

applicable JEDEC standard Non-adherence may affect processor reliability.

ABSOLUTE

STORAGE

applies to the unassembled component only and does not apply to the shipping media,

moisture barrier bags or desiccant.

Intel branded board products are certified to meet the following temperature and humidity limits that are

given as an example only (Non-Operating Temperature Limit: -40 °C to 70 °C, Humidity: 50% to 90%,

non-condensing with a maximum wet bulb of 28 °C). Post board attach storage temperature limits are not

specified for non-Intel branded boards.

The JEDEC, J-JSTD-020 moisture level rating and associated handling practices apply to all moisture

sensitive devices removed from the moisture barrier bag.

Nominal temperature and humidity conditions and durations are given and tested within the constraints

imposed by T

SUSTAINED

STORAGE

and customer shelf life in applicable intel box and bags.

Table 2-4.

Storage Conditions

Parameter Description

Min

Max

Notes

ABSOLUTE

STORAGE

The non-operating device storage temperature.

Damage (latent or otherwise) may occur when

subjected to for any length of time.

-55 °C

125 °C

SUSTAINED

STORAGE

The ambient storage temperature limit (in

shipping media) for a sustained period of time.

-5 °C

40 °C

SUSTAINED

STORAGE

The maximum device storage relative humidity

for a sustained period of time.

60% @ 24 °C

TIME

SUSTAINED

STORAGE

A prolonged or extended period of time; typically

associated with customer shelf life.

Months

Содержание 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011







































































































































Результаты поиска

Содержание 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011

Отзывы:

Похожие инструкции для 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011

Бренды по названию

Популярные бренды

Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011, Технические характеристики

Результаты поиска

Содержание 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011

Отзывы:

Похожие инструкции для 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011

Бренды по названию

Популярные бренды