Intek HR-200S, Руководство пользователя

Страница: 3 / 44

General Information
Thank you !
Thank you for choosing INTEK for your amateur radio applications. This user friendly transceiver will provide you with clear and reliable communications
and will keep your professional activities at peak efficiency. This transceiver incorporates the latest and most advanced technology, so you will be pleased
with its quality and its technical features.
Important notice !
The use of VHF and UHF FM transceivers is subject to the regulations applied in the country where the product has to be used. As regulations are usually
subject to possible modifications, please check the current regulations in your country with your dealer or local supplier. INTEK does not take any
responsibility for illegal use and operation of this product not in accordance with the regulation of the country where the product is used.
Safety notice
The user must know and understand the common risks related to the use of transceivers. Do not use the transceiver in environments at risk of explosion
(where there are gas, dusts, smokes, etc.). Do not use the transceiver in service areas or fuel stations, on board aircrafts, etc.
Cautions
Please observe the following precautions, in order to avoid causing fire, personal injuries or damage to the radio:
It is suggested that each transmitted message lasts a few minutes only, since very long transmissions at the maximum transmitter RF output power
may overheat the transmitter.
Do not alter or modify in any way your transceiver.
Do not expose the transceiver for a long time to direct sunlight and do not place it close to heat sources.
Do not expose the transceiver to excessively dusty or damp places, do not place it on unstable surfaces.
In case of anomalous smell or smoke that leaks out from the transceiver, turn it off immediately. Please contact an authorised service center.