Intek HR-200S, Руководство пользователя

Страница: 11 / 44

5
3
Red
Black
Regulated power supply (SPA-8230)
DC power cable with fuse holder
Regulated Power Supply
(SPA-8230)
Initial Installation
Before connecting the DC power to the transceiver, be sure to switch
the transceiver and the DC power supply OFF.
Do not plug the DC power supply into an AC outlet until you make all
connections.
need a separate 13.8V DC power supply (not included), power
supply ( SPA-8230)
as optional accessories. Please contact local
dealer to require.
The recommended current capacity of your power supply is 12A.
Connect the DC power cable to the regulated DC power supply 1.
and ensure that the polarities are correct. (Red: positive, Black:
negative).
Do not directly connect the transceiver to an AC outlet.
Use the supplied DC power cable to connect the transceiver to a
regulated power supply.
Do not substitute a cable with smaller gauge wires.
Connect the transceiver's DC power connector to the connector 2. on
the DC power cable.
.
Fixed Station Operation