Intek ET Series, Инструкция по эксплуатации

Страница: 12 / 36

- 11-
Programmable Side Key
No. Function
DTMF ON / OFF (*)
Description
Enable / disable DTMF Function
Check the current Squelch Level.
The radio will un-mute only when it receives a carrier signal.
1
Monitor
Monitor Momentary
2
3
The radio will un-mute no matter there is a carrier signal or not.
Squelch OFF
Squelch OFF Momentary
4
5
Check Squelch level 6
Adjust the current Squelch Level quickly. Adjust Squelch level 7
Automatic channel scanning. SCAN 8
Scan the Priority Channel before other channels. Priority Channel Scan 9
Delete the noise channel from the current scan group
temporarily. Nuissance Channel
Temporary Delete 10
Delete the noise channel from the current scan group. Nuissance Channel Delete 11
The Rx frequency will be used in place of the Tx frequency
during transmission. Talk Around (*) 12
Reverse the transmitting frequency and receiving frequency for
Repeater function. Reverse Frequency (*) 13
Check the transmitting power level on the current channel. Check TX Power (*) 14
Enable / disable VOX function. VOX ON / OFF 15
To know the current battery capacity. Check battery capacity 16
When you turn the Channel Selector Knob, the radio will report
the current channel position. Voice Announcement 17
For access to Repeaters 1750 Hz Tone (*) 18
To lock the current channel position, and the Channel Knob is
invalid. Channel Lock 19
You can speak quietly into the Microphone, and other users
still can hear clearly. Whisper (*) 20
Single Call and Group Call. Select Call (*) 21
The alarm mode can be programmed via Software. Emergency Alarm (*) 22
You can program the Side key (8), by using the dedicated PC software.
The programmable fuctions are as follow :
Note: Your dealer may assign different functions for Side Key (long press or short press the key).
(*) These funcions are available only on models MT-174ET and MT-460ET
English