a.
inst
alla
tion
9
21. identifY and -
Look for the “+” and “-” near the terminals tabs on the woofer
22. connect Wiring to Woofer
Connect wires VC1 to + and - of one voice coil, and wires VC2 to
the second coil. It doesn’t matter which coil is 1 or 2 as long as
you observe correct polarity.
DO NOT CONNECT THE COILS IN SERIES. A SERIES CONNEC-
TION RESULTS IN A WOOFER WITH DIFFERENT PARAMETERS.
23. Mount the sPeaker
Rotate the speaker as needed to align the mouting holes with the
threaded inserts in the mounting flange. Attach the speaker with
the #10 x 3/8” black machine screws. Tighten the screws in a star
pattern until the woofer is snug. Tighten firmly but be careful not
to overtighten.
24. install sPeaker grille
The speaker grille is a simple press fit - work the grille down into
the outer rubber gasket of the speaker.
25. install triM cord
Lay the trim cord into the gap between the outside of the speak-
er’s rubber gasket and the vinyl top of the enclosure. Carefully
cut the trim cord. Using a blunt flat or rounded object, work the
trim cord firmly into the gap.
