a.
inst
alla
tion
7
11. cut Plug froM old suBWoofer
Cut the plug off of the old enclosure, at least 3” from the plug.
12. striP Wire ends
Strip 3/8” of insulation from the ends of the plug wires.
13. sPlice Plug to Wiring harness
Unscrew the ends of the threadlock splices. Insert the stripped
end of the wire through the end. Work the wire strands around
the metal cone and into the base of the connector. Hold the wire
firmly in place and tighten the threaded end. Repeat for both
ends of each wire.
CONNECT: Red to Red, Green to Green, Black to Black, and White
to Gray.
14. if Your Vehicle’s Wiring colors are different:
You should be able connect whatever wire is in pin 1 (at square
end of the connector) to White, pin 2 to Green, pin 3 to Black, and
pin4 (at the round end of the connector) to Red. Confirm that the
woofer is operating correctly! If everything is connected correctly
you will get significant excursion (movement) of the woofer cone.
The BMW documentation does not list the colors and connections
for all vehicles, but this wiring pattern holds for all vehicles that
are listed and has held for every vehicle we have seen.
15. attach cliP nuts to neW Brackets
Slide the clip nuts over the brackets. The clip nuts will be in the
first and third holes (from front to back) once installed.
alternate Wiring colors!
