USER MANUAL - SUPRA 1101/1601/2101
www.xmart-ups.com
VER. 1907.10-AP-ENG
5
5.
UPS INSTALLATION
This UPS must be installed indoor with controlled environment free of excessive dust and, corrosive air.
Do not install in outdoor. Keep UPS working under operational conditions listed in specifications table of
this manual. Keep out of direct sun light, water and heat sources.
Do not install UPS close to PC screen to avoid interference. UPS must be at least at 20cm from screen.
Connect LAN cable to RJ45 port in this UPS identified as IN. Connect RJ-45 out to your PC LAN socket.
Plug power cord of this UPS to AC source socket.
Plug your products to UPS AC outlets.
IMPORTANT WARNINGS:
Make sure UPS is plugged to AC source compatible with UPS electrical specifications. Check UPS specs
in UPS label.
Make sure your products input voltage is compatible with UPS voltage output.
Check total load in Watts to be connected to UPS is not higher to maximum UPS capacity.
Laser printers and copiers are high load devices that require high peak power consumption. If laser
printers or copiers will be connected to this UPS make maximum peak power requirement is below UPS
maximum capacity in watts.
6.
OPERATION
Once UPS is installed and connected according to section 4 of this manual, please turn UPS on by
ON/OFF button in front panel. Front panel green LED must turns ON.
Turn your products ON one by one.
After finishing your products will be fully protected by the UPS.
This UPS has COLD-START function that allows to turn UPS on even during a failure in the main AC source.
USER MANUAL - SUPRA 1101/1601/2101
www.xmart-ups.com
VER. 1907.10-AP-ENG
6
7.
LCD
LCD shows valuable information about Utility and UPS data but also provides alarm codes for easy
troubleshooting. User can skip from screen to screen by simple touching LCD.
Note: Below table shows screens for 220V model. In 120V models, input & output values will be close to 120V.
NORMAL MODE
BATTERY MODE
ALARM BEEP
CODE
TROUBLESHOOTING
OUTPUT
SALIDA
Continuous
Beep continuo
Output Shorcircuit:
Remove faulty
equipment from UPS
output
INPUT
ENTRADA
Continuous
Beep continuo
Overload:
Remove non critical
equipments from UPS
output
LOAD
CONSUMO
Continuous
Beep continuo
Overcharge:
Call technical service
BATTERY
BATERIA
Continuous
Beep continuo
Battery Low:
Recharge during 6
hours. If not solved call
tech. service
OVERLOAD
SOBRECARGA
Continuous
Beep continuo
Output Hight under
battery mode:
Call Tech. Service
Mode Symbol
Símbolo de
Modo
Continuous
Beep continuo
High Temperature:
Call Tech. Service
UTILITY & UPS INFORMATION
ALARM & ERROR CODES
8.
CONTROL SOFTWARE
Most of the models of this UPS family come with USB port to communicate with your PC. In that way UPS can
be monitored and configured. Your PC can be shutdown automatically when a input AC failure is detected
saving your information and providing a controlled shutdown. Event log and alarms can also be monitored from
your PC. Control software can be downloaded from our website: www.xmart-ups.com. We keep updated last
updated version. User manual and installation manual is also available in our web.
Our software is available in different versions for: Windows, Mac OSX, Linux and Unix.