24
Tuning in a radio station
OFF
ON
STANDBY
POWER
STANDBY/ON
BASS
TREBLE
PHONES
SPEAKERS
A
B
MASTER VOLUME
PRESET / MODE ADJ
ENTER / SCAN
DOW N
UP
SP / SYS
SETUP
MODE
TUNING
UP
DOWN
CH LEVEL
MEMORY
FM MUTE /
MODE
LATE NIGHT /
FRONT EFFECT
DISPLAY
STEREO
5 CH STEREO
DSP
LISTENING MODE
LFE LEVEL
CONTROL
/DTS SURROUND
Re -EQ
DIGITAL/
ANALOG
DIMMER
FM
AM
PHONO
C D
TAPE
DVD
MULTI CH
INPUT
VIDEO 3
VIDEO 2
VIDEO 1
FM
AM
TUNING DOWN/UP
FM MUTE/MODE
DISPLAY
1. Press the FM or AM button.
2. Use the TUNING UP/DOWN buttons to change the fre-
quency.
UP.....................the frequency increases.
DOWN..............the frequency decreases.
•
The frequency changes in 50 kHz steps in FM and 10 kHz in
AM each time you press the TUNING UP/DOWN button.
•
In FM, if this button is held continuously for more than 0.5 sec-
onds, the frequencies are scanned automatically (FM auto tun-
ing mode). When a broadcast is received, scanning stops.
When you tune in a stereo FM station, the FM STEREO indicator
lights up if the signal is sufficiently strong.
If the signal is weak, it may be impossible to tune in to the desired
station. In this case, tune in as follows.
Press the FM MUTE/MODE button. The FM MUTE indicator
turns off. At this time, the station will be in mono and interstation
noise will be heard. Select the station to which you want to listen.
Pressing the DISPLAY button each time will change the indication
as follows:
Frequency (preset No.)
↔
Listening mode
Manual tuning
Listening to a stereo radio station (FM mode)
DISPLAY button
FM
AM
1
2
TUNING
UP
DOWN
ch
FM MUTE /
MODE
DISPLAY
