Integra DTR-40.5, Инструкция по эксплуатации

Страница: 61 / 104

Advanced Operations
En-61
Operating
procedure
(
➔
page 55 )
THX Audio Setup
■
Surr Back Speaker Spacing
`
<1ft (<0.3m)
`
1ft-4ft (0.3m-1.2m)
`
>4ft (>1.2m)
You can specify the distance between your surround
back speakers.
Note
• Cannot be set if:
– “ Surround Back ” is set to “ None ” (
➔
page 59 ).
– “ Surround Back Ch ” is set to “ 1ch ” (
➔
page 59 ).
– “ Powered Zone 2 ” is set to “ Yes ” (
➔
page 59 ) and
Zone 2 turned on (
➔
page 76 ).
■
THX Ultra2/Select2 Subwoofer
`
No
`
Yes
If you’re using a THX-certified subwoofer, set this
setting to “
Yes ”.
Note
• If the “ Subwoofer ” setting is set to “ No ”, this setting cannot
be selected (
➔
page 59 ).
■
BGC
`
Off
`
On
If your listening room layout (for practical or aesthetic
reasons) locates most of the listeners close to the
rear wall, the resulting bass level can be sufficiently
reinforced by the boundary that the overall sound
becomes “boomy”. THX Select2 Plus receivers
contain a Boundary Gain Compensation (BGC)
feature to improve bass balance.
Note
• This setting is only available if “ THX Ultra2/Select2
Subwoofer ” is set to “ Yes ”.
• If the “ Subwoofer ” setting is set to “ No ”, this setting cannot
be selected (
➔
page 59 ).
■
Loudness Plus
`
Off
`
On
When the “ Loudness Plus ” setting is set to “ On ”, it is
possible to enjoy even subtle nuances of audio
expression at low volume. This is only available when
the THX listening mode is selected.
■
Preserve THX Settings
`
Yes
`
No
If this setting is set to “ Yes ”, Dynamic EQ and
Dynamic Volume have no effect in THX listening
mode.
Note
• This setting is fixed at “ Yes ” if “ Loudness Plus ” is set to
“ On ”.
THX Loudness Plus
THX Loudness Plus is a new volume control
technology featured in THX Ultra2 Plus™ and THX
Select2 Plus™ Certified receivers. With THX
Loudness Plus, home theater audiences can now
experience the rich details in a surround mix at any
volume level. A consequence of turning the volume
below Reference Level is that certain sound elements
can be lost or perceived differently by the listener.
THX Loudness Plus compensates for the tonal and
spatial shifts that occur when the volume is reduced
by intelligently adjusting ambient surround channel
levels and frequency response. This enables users
experience the true impact of soundtracks regardless
of the volume setting. THX Loudness Plus is
automatically applied when listening in any THX
listening mode. The new THX Cinema, THX Music,
and THX Games modes are tailored to apply the
proper THX Loudness Plus settings for each type of
content.
With the Audio Adjust functions and settings, you can
adjust the sound and listening modes as you like.
Multiplex/Mono
■
Multiplex
Input Channel
`
Main
`
Sub
`
Main/Sub
This setting determines which channel of a stereo
multiplex source is output. Use it to select audio
channels or languages with multiplex sources,
multilingual TV broadcasts, and so on.
■
Mono
Input Channel
`
Left + Right
`
Left
`
Right
This setting specifies the channel to be used for
playing any 2-channel digital source such as Dolby
Digital, or 2-channel analog/PCM source in the Mono
listening mode.
Output Speaker
`
Center :
Mono audio is output by the center speaker.
`
Left / Right :
Mono audio is output by the front left and right
speakers.
This setting determines which speakers output mono
audio when the Mono listening mode is selected.
Note
• If the “ Center ” setting is set to “ None ” (
➔
page 59 ), this
setting cannot be selected.
3. Audio Adjust