Advanced Operations
En-64
Main Menu
Hardware Setup
Multi Zone
■
Zone 2 Out, Zone 3 Out
`
Fixed
:
The Zone 2/3 volume must be set on the amp in that
zone.
`
Variable
:
The Zone 2/3 volume can be set on the AV receiver.
If you’ve connected your Zone 2/3 speakers to an amp with
no volume control, set the “
Zone 2 Out
” and “
Zone 3
Out
” setting, respectively, to “
Variable
” so that you can
set the volume, balance, and tone of zone 2 and volume of
zone 3 on the AV receiver.
■
Zone 2 Maximum Volume,
Zone 3 Maximum Volume
`
Off
,
50
to
99
(Absolute display)
`
Off
,
–32dB
to
+17dB
(Relative display)
With this setting, you can limit the maximum volume for
Zone 2/3.
■
Zone 2 Power On Volume,
Zone 3 Power On Volume
`
Last
,
Min
,
1
to
99
or
Max
(Absolute display)
`
Last
,
–
Q
dB
,
–81dB
to
+18dB
(Relative display)
This setting determines what the volume will be for
Zone 2/3 each time the AV receiver is turned on.
To use the same volume level as when the AV receiver was
last turned off, select “
Last
”.
The “
Zone 2 Power On Volume
” and “
Zone 3 Power On
Volume
” cannot be set higher than the “
Zone 2 Maximum
Volume
” and “
Zone 3 Maximum Volume
” setting.
Tuner
■
AM/FM Frequency Step (North American
models)
`
10kHz/200kHz
:
`
9kHz/50kHz
:
Select the frequency step according to your area.
■
AM Frequency Step (Australian models)
`
10kHz
:
`
9kHz
:
Select the frequency step according to your area.
For AM/FM tuning to work properly, you must specify the
AM/FM frequency step used in your area.
Note
• When this setting is changed, all radio presets will be deleted.
HDMI
■
HDMI Control(RIHD)
`
Off
`
On
Turn this setting on to allow
p
-compatible
components connected via HDMI to be controlled by the
AV receiver (
➔
page 92
).
Note
• When the setting is set to “
On
” and the menu is closed, the names
of connected
p
-compatible components and “
RIHD On
”
are displayed on the AV receiver.
“
Search…
”
→
“
(name)
”
→
“
RIHD On
”
When the AV receiver cannot receive the name of the component,
it is displayed as “
Player
*
” or “
Recorder
*
”, etc. (“
*
” shows up
and indicates the number of components, when two or more are
received).
• When an
p
-compatible component is connected to the
AV receiver via an HDMI cable, the name of the connected
component is displayed on the AV receiver display. For example,
while you are watching TV broadcasting, if you operate a Blu-ray
Disc/DVD player (being powered on) with the remote control of
the AV receiver, the name of the Blu-ray Disc/DVD player will
be displayed on the AV receiver.
• Set it to
“
Off
” when a connected piece of equipment is not
compatible or it is unclear whether the equipment is compatible
or not.
• If operation is not normal when set to
“
On
”, change the setting to
“
Off
”.
• Refer to the connected component’s instruction manual for
details.
• When the “
HDMI Control(RIHD)
” setting is set to “
On
”, the
power consumption on standby mode slightly increases.
(Depending on the TV status, the AV receiver will enter standby
mode as usual.)
• The
p
control does not support
HDMI OUT SUB
. Use
HDMI OUT MAIN
instead.
• When the source equipment is connected with the
u
connection, it may malfunction if “
HDMI Control(RIHD)
” is
set to “
On
”.
■
HDMI Through
`
Off
`
BD/DVD
,
CBL/SAT
,
STB/DVR
,
GAME
,
PC
,
AUX
,
TV/CD
,
EXTRA1
,
EXTRA2
:
Selects the input source for which the HDMI
Through function is enabled.
`
Last
:
The HDMI Through function is activated on the input
source selected at the time of setting the AV receiver
to standby mode.
When enabling the HDMI Through function, regardless of
whether the AV receiver is on or in standby, both audio
and video streams from an HDMI input will be output to
the TV or other components via HDMI connection. The
HDMI
indicator will be dimly-lit in standby mode. Note
that the indicator may not light under certain conditions
(
➔
page 49
).
This setting is fixed to “
Auto
” automatically when the
above “
HDMI Control(RIHD)
” setting is set to “
On
”,
resulting in automatic input source selection.
Hardware Setup
1
2
3
4
5
“
Setup
”
To be continued
Содержание DTR-30.4
Страница 1: ...AV Receiver DTR 30 4 Instruction Manual...
