Names and functions of parts
9
It
De
Remote control
Í
button:
Press this button to turn the unit on or put it
in standby mode.
Input Selector buttons:
Use these buttons to select
the source to playback.
Skip (
:
/
9
) buttons
(*)
Search (
6
/
5
) buttons
(*)
Repeat button:
Turns repeat play on and off and
selects the mode. (*)
Speaker A/B button:
Select the terminals to output
audio from between SPEAKERS A/B.
Direction ( / / / )/Enter buttons:
Select items
with the direction buttons and press the Enter button to
confirm.
Setup button:
Used to display the setup menu.
CH (
i
/
j
) buttons:
Select registered stations.
Number buttons
Display button:
Change the information shown.
Dimmer button:
Use this button to switch the display’s
brightness between normal, moderately dark and dark.
Remote Mode Main button:
Switches the remote
control to the mode for operating this unit.
Remote Mode Zone2 button:
For use when the unit
is connected with a pre-main amplifier, a power
amplifier or a subwoofer with built-in amplifier in a
separate room and sound is played there.
Pause (
;
) button
(*)
Playback
(
1
)
button
(*)
Stop
(
∫
)
button
(*)
Random button:
Plays tracks in the folder or playlist
(DLNA) randomly. (*)
Menu button:
Press this button to display the menu.
Return button:
Returns the display to the previous
state during setting or operation.
Volume
3
/
4
buttons
Audio button:
Use this button to adjust sound quality,
etc.
Muting button:
Temporarily mutes audio.
CLR button:
Use this button to clear the characters
that you have input.
Sleep button:
Press this button to set the sleep timer.
*
Operate with USB storage device play or the home network
feature (DLNA, Home Media).
*
If you do not use the remote control for a long time, remove the
batteries to prevent leakage. Note that keeping consumed
batteries inside may cause corrosion resulting in damage of the
remote control.
Remote control sensor
5 m (Approx.
16 ft.) or less
Batteries
(AAA/R03)
DTM40.7_mst.book 9 ページ ２０１５年７月２４日 金曜日 午後１２時５８分
