Integra DTM-40.4 Скачать руководство пользователя страница 3

En-

3

Precautions

1. Recording Copyright

—Unless it’s for personal use 

only, recording copyrighted material is illegal 
without the permission of the copyright holder.

2. AC Fuse

—The AC fuse inside the unit is not user-

serviceable. If you cannot turn on the unit, contact 
the dealer from whom you purchased this unit.

3. Care

—Occasionally you should dust the unit all 

over with a soft cloth. For stubborn stains, use a soft 
cloth dampened with a weak solution of mild 
detergent and water. Dry the unit immediately 
afterwards with a clean cloth. Don’t use abrasive 
cloths, thinners, alcohol, or other chemical solvents, 
because they may damage the finish or remove the 
panel lettering.

4. Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE
FIRST TIME, READ THE FOLLOWING
SECTION CAREFULLY.
AC outlet voltages vary from country to country.
Make sure that the voltage in your area meets the
voltage requirements printed on the unit’s rear panel
(e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).

The power cord plug is used to disconnect this unit
from the AC power source. Make sure that the plug
is readily operable (easily accessible) at all times.

Pressing 

On/Standby

 to select Standby mode does

not fully disconnect from the mains. If you do not
intend to use the unit for an extended period,
remove the power cord from the AC outlet.

5. Preventing Hearing Loss

Caution

Excessive sound pressure from earphones and
headphones can cause hearing loss. 

6. Batteries and Heat Exposure

Warning

Batteries (battery pack or batteries installed) shall
not be exposed to excessive heat as sunshine, fire or
the like.

7. Never Touch this Unit with Wet Hands

—Never 

handle this unit or its power cord while your hands 
are wet or damp. If water or any other liquid gets 
inside this unit, have it checked by your the dealer 
from whom you purchased this unit.

8. Handling Notes

• If you need to transport this unit, use the original 

packaging to pack it how it was when you 
originally bought it.

• Do not leave rubber or plastic items on this unit 

for a long time, because they may leave marks on 
the case.

• This unit’s top and rear panels may get warm 

after prolonged use. This is normal.

• If you do not use this unit for a long time, it may 

not work properly the next time you turn it on, so 
be sure to use it occasionally.

For U.S. models

FCC Information for User

CAUTION:

The user changes or modifications not expressly 
approved by the party responsible for compliance could 
void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful 
interference in a residential installation.

This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there is 
no guarantee that interference will not occur in a 
particular installation. If this equipment does cause 
harmful interference to radio or television reception, 
which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and 

receiver.

• Connect the equipment into an outlet on a circuit 

different from that to which the receiver is 
connected.

• Consult the dealer or an experienced radio/TV 

technician for help.

For Canadian Models

NOTE:

 

THIS CLASS B DIGITAL APPARATUS 

COMPLIES WITH CANADIAN ICES-003.

Modèle pour les Canadien

REMARQUE:

 

CET APPAREIL NUMÉRIQUE DE 

LA CLASSE B EST CONFORME À LA NORME 
NMB-003 DU CANADA.

Содержание DTM-40.4

























































Отзывы: