Integra DLV-100, Руководство по обслуживанию

Страница: 4 / 48

4.10 On Screen Display
1. Pull down menu
Basic/Custom menu <> Advanced menu
2. Multilingual menu
English / French /German / Italian / Japanese / Spanish / Swedish
4.11 Remote
Palm type remote unit
4.12 Input current
2.2A 100 ~ 120VAC/1.1A 200 ~ 240VAC
4.13 Plug & Play data
Tab.1 EDID data
0000 1111 2222 3333 4444 5555 6666 7777 8888 9999 A
A A
A B
B B
B C
C C
C D
D D
D E
E E
E F
F F
F
00 00 00 00
00 FF FF FF FF FF FF 00 38 A3 D3 00 01 00 00 00
10
10 10
10
27 0B 01 02 0E 00 00 78 0A 34 70 95 59 4F 88 26
20 20 20 20
15 4A 53 FF FF 80 31 59 45 59 61 59 71 59 81 4F
30
30 30
30
81 99 A9 4F 01 01 EA 24 00 60 41 00 28 30 30 60
40 40 40 40
13 00 00 00 00 00 00 1E F9 15 20 F8 30 58 1F 20
50 50 50 50
20 40 13 00 00 00 00 00 00 1E 00 00 00 FD 00 32
60
60 60
60
78 0F 64 0A 00 0A 20 20 20 20 20 20 00 00 00 FC
70 70 70 70
00 4F 4E 4B 59 4F 20 44 4C 56 31 30 30 0A 00 E2
4.14 Safety test
(1)Dielectric strength test
By the test vessel, under the condition of main power supply ON,
Apply AC voltage of 1500V(+50/-0) ,at 50Hz or 60Hz for 1.5~2 second between power supply
circuit part(AC) and exposure metal part.
No insulation destruction, catching fire, and so on is allowed.
(2) Insulation resistance test
Measure insulation resistance between power supply circuit part(AC) and exposure metal
part (FG) under the condition of main power ON(Stand By mode) by using 500V insulate
ohmmeter.
Insulation resistance shall be more than 50M ohm.
(3)Leakage electric current test
Measure leakage electric current by the leakage ammeter under the condition of main power
supply ON (Standby condition). The measurement impedance should be measured by
the build in resistor of 1.5K
Ω
, with the bypass capacitor of 0.15
μ
F.
The leakage electric current should be less than 2mA each.
4.15 Signal table
Refer to Tab.2.
DLV-100