Integra DBS-30.3, Инструкция по эксплуатации

Страница: 40 / 55

EN
40
11. SETUPS
11.1 Network Connection
[Home ] → “Settings” → “Network” → “Network Connection”
Set up network connection settings in order to use
BD-Live™, DLNA home media server, or network update
function.
■ Connection Test
After you enable a network connection or change the
network settings, always perform the connection test to
check if the connection is correctly made.
1. Use
[ Î / ï / Í / Æ ] to select “Settings” in the home
menu, then press [Enter] .
2. Use [ Î / ï ] to select “Network”, then press [Enter] .
3. Use [
Î
/
ï
] to select “Network Connection”, then
press [Enter] .
4. Use [ Î / ï ] to select “Connection Test”, then press
[Enter] .
• Connection test will start automatically and the test
result will appear right after the connection test
finishes.
“Connecting...” : The test is in progress.
“Pass”
: Network connection succeeds.
“Failed” : Network connection failed.
5. If the connection test passes, press [Enter] .
D
Note
• If the connection test passes, you are ready to use
BD-Live™, DLNA home media server, or network
update function, using the Internet without making any
additional settings.
• If the connection test fails, you may need to check
your router settings and make sure the physical
connection is secure. If you need the MAC address
of this unit to complete your router settings you can
view it on the “Network Status” screen (refer to page
39 ).
• When connecting this unit directly to a modem for
the first time or connecting it to a modem which was
previously connected to any other network device
(e.g. a router, PC, etc.), you may have to power cycle
the modem to reset the settings on the modem.
■ Auto
Select “Auto” to set the network setting automatically.
1. Follow steps 1 to 3 in “Connection Test” on page 40.
2. Use
[
Î
/
ï
] to select “Start”, then press [Enter] .
3. Use [ Î / ï ] to select “Auto”, then press [Enter] .
• The unit will start the connection test automatically
and the test result will appear right after the test
finishes.
4. The network setting is completed. Select “End”.
■ Manual
In the following cases, select “Manual” to set each setting
as necessary.
– When connection test failed with the setting of
“Auto”.
– When instructed by your Internet service provider
to make specific settings in accordance with your
network environment.
1. Follow steps 1 to 2 in “Auto” on page 40.
2. Use
[ Î / ï ] to select “Manual”, then press [Enter] .
3. Use [
Î
/
ï
] to select “IP Address”, then press
[Enter] .
4. IP address setting screen will appear. Enter IP address
with cursor buttons and number buttons.
Cancel
Next
ancel ancel
Next N
a
N
Network Settings (Manual)
IP Address
Please enter the IP Address.
Back Clear OK
• Enter the IP address after checking the
specifications of your router.
• If the IP address is unknown, check the IP address
of other devices. (e.g. PC connected via LAN cable)
and assign a different number from those of other
devices.
5. Use [ Î / ï / Í / Æ ] to select “OK”, then press
[Enter] .
E5XF1ED̲EN̲Book.indb 40 E5XF1ED̲EN̲Book.indb 40 2011/05/20 14:49:55 2011/05/20 14:49:55
Downloaded From Disc-Player.com Integra Manuals