Integra CDC-3.1, Инструкция по эксплуатации, Страница: 15 / 16

15
/ /
1 2 3
4 5 6
MEMORY DISC No.
TRACK
1 2 3
4 5 6
MEMORY DISC No.
TRACK
REMAIN
b
a
c
e
d
TOTAL
Using Memory Functions
Contents of the display
Example: When the sixth track of DISC
#5 is stored in memory as the second
track to play back (P-02).
a Track number
b MEMORY indicator
c
Program number
d
Disc Number
e Total number of stored programs
Clearing the last track stored
Press the Clear button.
The last track stored in memory is
cleared.
Clearing the entire program
Press the Memory button to turn off
the MEMORY indicator.
The contents of memory are com-
pletely cleared.
Checking what is stored in
memory
1. First, if the CD changer is playing
in memory playback mode, press
the Stop button. The CD changer
will display the last program num-
ber stored in memory.
2. If you press and hold down the
/
button, the track numbers in
memory will appear in the display
in the order in which they were
stored. If you press and hold down
the
/ button, the track num-
bers will appear in the opposite or-
der.
MEMORY
REMOTE CONTROLLER RC-435C
CLEAR
REMOTE CONTROLLER RC-435C
REMOTE CONTROLLER RC-435C
Notes about the time display
In the following cases, the time display may indicate “– – : – –” due to the memory limitations.
• If you switch to the remaining time display while the CD changer is playing the 21st or later song on the disc
• If you switch to the total remaining time display after storing the 21st or later song on the disc
• If you switch to the total remaining time display after the CD changer plays songs from memory for more than 99
minutes 59 seconds, or
• If you switch to the total remaining time display during random playback of a CD that contains 21 or more
songs.
After two seconds
Clear
Memory
1 2 3
4 5 6
MEMORY DISC No.
TRACK
CDC-3.1_14-16 09/05/2000, 4:25 PM 15