Rotate the battery enclosure in an anti-clockwise (counter clockwise) direction to
pre-twist the wires before screwing on (see fig 7).
Ensure that no wires are going to be captured or damaged by screwing on the
battery enclosure.
Bring the thread of the battery enclosure into contact with the thread of the
logger.
Make sure the battery enclosure and the logger body are exactly aligned.
With small positive pressure, screw the battery enclosure into the logger body (see
fig 8).
If the battery enclosure rotates more than one revolution without the threads
engaging, stop and repeat the process.
Check that the O ring on the communication socket for damage, and replace if
necessary (see fig 9).
Connect the logger to a computer and check the battery voltage on the real-time
screen.
If everything is OK, replace the label with the new label provided (see fig 10).
Fig 1:
Unscrew battery enclosure
Anti-clockwise.
Fig 2:
Identify the Battery and
Communications wires.
Note:
If any of the wires are red, black,
orange and yellow the battery enclosure will
need to be replaced with the Stainless Mk4
tube (battery enclosure).
