- Segment conveyor-page 1.4
General
1.
1.
1.4 Technical data
Control voltage:
24 V DC
Rated current:
min. 1 A
Connection to power supply:
25-pin SUB-D bush
Infeed cable cross section:
25 x 0.14 mm²
Output/cycle:
Varies by product part and segment conveyor
Compressed air supply:
Service pressure:
6 bar
Quality:
dried, filtered and unoiled
Connection:
8 mm plug-in coupling
Machine dimensions:
See chapter 1.5 "Dimensions"
Weight:
Varies by segment conveyor and features
See chapter 4 "Transport and installation"
Product specifications
(as of 01.2010)
Minimum and maximum component sizes
Article number
Sorting position
Sort items
Min. part size
Max. part size
Max. part length
SG2H
hanging
e.g. screw
approx. M 1.6
approx. M 5
approx. 50 mm
SG2L
flat
e.g. cylinder pin
Ø 2,0 mm
Ø 6,0 mm
approx. 80 mm
SG3H
hanging
e.g. screw
approx. M 4
approx. M 12
approx. 70 mm
SG3L
flat
e.g. cylinder pin
Ø 6,0 mm
Ø 20,0 mm
approx. 100 mm
The product parts may not be magnetic or coated with oil, grease
or any other coating.
If the product parts do have a coating, the sliding surfaces of the
segment conveyor must be cleaned in regular intervals. The
cleaning cycle (frequency) must be practically determined.
Only briefed personnel with appropriate tools and cleaning agents
nay clean the machine,
The factory-adjusted settings may not be changed or damaged.