Instruction Manual
|
15
T: 303-833-6644
or
800-666-1611
www.inteccorp.com
Original Language - English
Chain is not aligned with
sprockets.
Disconnect electrical power.
Have a qualified technician
realign chain and sprockets.
Problem
Likely Cause
Remedy
Wireless remote not controlling
system as desired. Pressing ‘on’
and blower or agitator not
turning ‘on’; or pressing ‘off’
and blower or agitator not
turning ‘off’.
Reception range less than
desired.
Make sure the trailer or truck’s
doors –especially the large door
in back -- are open to allow for
radio frequency waves to easily
enter and access the receiver in
the blowing machine.
Antenna in the down position.
Position the antenna into a
straight position vs. the 90
degree bend. This allows the
machine to act as a source to
gather the radio frequency
waves and enhances reception).
Install the optional antenna
extender. Contact Intec for
details.
Blower and agitator continue to
run and wireless remotes do
not control system.
Transmitter out of range from
receiver.
Move closer to system.
Transmitter battery needs to be
replaced.
Replace battery. Intec can
provide assistance with
instructions as beneficial.
Need to re-sync the receiver to
the transmitter.
Follow instructions provided in
manual.