© INTEC Video Systems, Inc.
Revision F May, 2013
3
General Information
Introduction
Thank you for selecting an INTEC Car Vision®
System. Before using your system, please be sure to
read and understand these instructions carefully. If
you have any questions or concerns, please do not
hesitate to contact us toll free at 800-468-3254
(west) or 800-522-5989 (east).
This Guide is intended to provide you with
information needed to successfully install and
operate the CVS100 controller when used with an
INTEC CVD Series display that has software version
2.5.0 installed.
Important Information
Please read, follow and keep these instructions for
future reference. A copy of these instructions should
be left in the vehicle in which the system is installed.
There are no user serviceable parts inside the
system components. All service must be completed
by authorized service personnel only. Please refer to
the Warranty section described later in this manual.
Always use the proper tools, wear protective clothing
and take necessary precautions when working
around electricity to prevent electrical shock.
Use only INTEC specified and provided cables to
connect the components of the system. Use of other
than INTEC specified and supplied components and
cabling could be dangerous and result in damage to
the system components and void the warranty.
Use only INTEC specified and supplied accessories
and options when upgrading your system.
Operating the camera system on too low or too high
a voltage may damage the system.
Always confirm the view provided by the camera is
adequate for your needs prior to vehicle use.
Adjustments to the camera viewing angle should be
made before use, if necessary.
Most states have laws pertaining to motor vehicles
equipped with a video display within the driver’s field
of vision, either directly or indirectly, unless the video
display is used in conjunction with a back up safety
camera to monitor the blind spots around the
vehicle. INTEC’s products are specifically designed
to enhance vehicle safety. Use of an INTEC display
to view video in any manner other than intended
requires installation in accordance with your state
laws.
We recommend the use of the optional Radar
Sensors to enhance overall safety.
Do NOT let the Car Vision® System distract you
from driving safely.
Certificates of Compliance
RoHS
COMPLIANT
2002 / 95 / EC
This device complies with
Part 15 of the FCC rules.
