inside to reach a state of self-locking; when detaching the legrest, you should first, then turn the legrest
outside into a certain angle, lift it to get out of the fixed pins, and take the legrest at last. (Figure 10)
(9) (10)
2.9 Operation method of exchange
.
Push the quick release button of
24
＂
real wheels and release the wheels from holes(Figure 11)
.
(11)
3. Maintenance
3. 1 Wheelchairs must be examined to see whether all parts and bolts are loose or not after usage in some period
of time. If they are loose, people involved should adjust them in time for fear of insecure hidden trouble.
3.2Lubricant oil should be added on the moving parts of wheelchairs, which makes wheelchairs more flexible to
operate.
3.3 Soft and dry dishcloth shall be used to clean water and pollutant on the surface of wheelchairs after usage to
avoid rustiness.
3.4 Seat and back upholstery shall be kept clean and tidy so as to protect users’ skin.
4. Notices
4.1 Wheelchair is used as a tool instead of walk for handicapped, patient and the old, so it is suitable to be used on
the flat surface in or out of the room. If it needs long-distance use, there must be somebody accompanied.
In case
of coming across with obstacles, the
a
c
c
ompany should cinch the handle with both hands, trample
the end of tube of the wheelchair, lean back the wheelchair to lift the front castor, then cross the
obstacles.
4.2 Wheelchair can load 120kg on flat road. If a user’s weight is more than 120kg, please take care of using it or
contact the manufacturer to make a special one.
4.3 User uses wheelchair by himself, please run smoothly, and the speed should be 3-5km/h.
4.4 Brakes are used to go up and down or stop for stabilization, not used to hold moving wheelchair, especially
while going up or down on a slope, otherwise there will be roll-over risk.
