AirGate-Modbus
INTAB INTERFACE-TEKNK AB
8/22
RESTRICTION
In case there is the need to implement a tree-shaped network, a restriction must be observed. Due to issues imposed by Modbus
standard, Modbus slaves must not be connected between
AirGate-Modbus
as signed in
Fig. 7
.
Fig. 7 -
Restriction
SETUP SOFTWARE
The
DigiConfig
application is a Windows® program used for the configuration of the
AirGate-Modbus
. For its installation, execute
the file “DigiConfigSetup.exe” from the CD. When installing the setup software, the USB Serial Port driver of
AirGate-Modbus
may
be automatically installed according to
Fig. 10
.
Fig. 8 -
Selection of components
DigiConfig
has a complete help file, with all necessary information for its full usage. To consult the help, start the application and
select the “
Help
” menu or press the “
F1
” key.
In case you don't have the CD which accompanies the
AirGate-Modbus
, consult the
www.novusautomation.com
website to get
DigiConfig
installer and the additional manuals.
To configure a
AirGate-Modbus
you must execute the
Digiconfig
and in the main screen access “configurations/communication”
and edit the configurations, according to
Fig. 11
:
