TwinLock compact
Manual
Version 1.06
12
3.1. Code and Locking Functions
Master code
Each lock has a master code (ID = 00 + 6-digit master code).
The master code has the authorization to program lock-specific procedures (e.g. time
delay, user codes, etc.) or to unlock, respectively.
The master code can not be deleted or deactivated.
Attention:
The default code for the user 00 (= Master) of each lock is the pre-programmed
code 1 2 3 4 5 6 . The user codes no. 01…99 of the individual locks have been
deactivated by the manufacturer.
For safety reasons, the master codes of the individual codes must be changed
IMMEDIATELY!
When programming the code you must see to the new unlocking code being
checked repeatedly while the safe is open.
Do not use personal data when programming unlocking codes!
Loosing a master code can have very costly consequences!!!
Manager code
There is one manager code (6-character code) per lock. The manager code is also
called the
system code
!
The manager code has the authorization to program the settings and time functions.
It does not have any opening authorization, though.
The manager code cannot be deleted or deactivated.
ATTENTION:
The code 1 1 1 1 1 1 is pre-programmed as the works code for the system code
.
User codes, Benutzercodes
Each lock has 35 user codes (user ID + 6-digit user code).
The user codes are programmed or deleted by the according master code. A user
can reprogram his/her user code autonomously. Otherwise, the user only has an
unlocking authorization.
A user code can be assigned the possibility for “Quick unlocking” (= quick unlocking
code) without time delay expiration (see timer programs 3.2.2).
Status indicator for programmed user codes
For each lock, the programmed user codes can be displayed. The programming
status, i.e. OK or NOK is displayed. The display can only be activated by the
according lock master.
