INSYS GSM 4.3 I4, Руководство пользователя

Страница: 60 / 78

Functions INSYS GSM 4.3 I4
60
In order to
delete the password
, use the com-
mand
Replace
<oldPW>
with the current password.
If you do not enter a new password, the pass-
word will be disabled.
AT**PASSC=<oldPW>
Perform the remote configuration
In the following, we show how you can configure the INSYS GSM 4.3 I4 re-
motely.

You will need a modem which you can use to establish a connection to the
INSYS GSM 4.3 I4.

You will need a terminal program.
1. Open your terminal program.
2. Establish a connection to the INSYS GSM 4.3 I4. Use the local modem to dial
the phone number of the INSYS GSM 4.3 I4 with ATD<phonenumber>.

The local modem establishes a connection.
3. After the connection has been established, enter *** (three asterisks). This
will switch you into remote configuration mode. Wait at least 1 second be-
fore and after entering *** and do not finish the entry with the Enter key.

If you have configured a password, you will now need to enter it now.

After you successfully entered the password, the INSYS GSM 4.3 I4 will send
a prompt in form of an ">".

You can now configure the INSYS GSM 4.3 I4 remotely.

Some AT commands are not available in remote configuration mode (refer
to the AT Command Reference).
4. Finish the remote configuration by entering AT**EXIT .

The INSYS GSM 4.3 I4 is now in the normal data connection mode. You can
now exchange data between your local modem and the INSYS GSM 4.3 I4,
or terminate the connection.

Enter *** to re-initiate a remote configuration.