INSYS GSM 4.3 I4, Руководство пользователя, Страница: 34 / 78

Operating Principle INSYS GSM 4.3 I4
34
10.3 Operation with HSComm GSM
Use the software HSComm to easily configure the INSYS GSM 4.3 I4. HSComm of-
fers an interface for the parameters of the most important AT commands of the IN-
SYS GSM 4.3 I4. The operation is mostly self-explanatory. You can download the
software from the INSYS MICROELECTRONICS homepage (www.insys-tec.de).
Configuration and settings of the INSYS GSM 4.3 I4 with HSComm
How to configure the INSYS GSM 4.3 I4 with the software HSComm.

The INSYS GSM 4.3 I4 is connected to the PC and switched on.

The software HSComm GSM is installed on the PC.
1. Start the program HSComm GSM.

The program starts.

A progress bar appears in the field on the right if the automatic recognition
at program start is activated in the program settings of HSComm.

If this option is not activated, the settings can be read out with the
Read settings
button in the field on the right.

The program will now search for a connected INSYS GSM 4.3 I4 and will at-
tempt to read the settings.

After a short time, the settings are read out. A status message "Settings
read." appears.
2. Click OK in the status message.
3. Enter the required settings.
4. Afterwards, click on the button Send settings in the field on the right.

A progress bar appears above the button.

The entered settings are sent to the INSYS GSM 4.3 I4 and stored.

A dialog box with the message "transmission finished" is displayed.
5. Click OK in the status message.