INSYS Powerline GP
Assembly
25
Caution!
Destruction of the device due to transport damage and
improper connection conditions!
If a INSYS Powerline GP with transport damage is used or
improper connection conditions are present, the device
will be destroyed.
Please check the device for visible transport damage as
well as the connection conditions at the site against the
requirements of the device before installation. The
connection may only be performed using proper tools and
must not be performed in energised condition.
Note
Radio interferences in short wave range!
The INSYS Powerline GP may interfere the reception of
short wave radio in the direct close range.
The INSYS Powerline GP can cause radio interferences in
the living quarters; in this case the operator can be
requested to take appropriate measures.
Mounting the device to the DIN rail
How to mount the INSYS Powerline GP to a DIN rail:
1.
Position the device at the DIN rail as seen in the following diagram.
There are two snap-in hooks at the upper and lower edge of the DIN
rail groove of INSYS Powerline GP. Hook the upper one into place
behind the upper edge of the DIN rail.
