15
For more tips, tricks and videos visit,
www.instyler.co.uk
What is the power of the InStyler?
A.
The InStyler is 220-240v, 50/60Hz and 58 Watts.
How do I turn the InStyler on?
`
A.
Check to make sure your InStyler is plugged in. Press
the Power button. The LED bars should light and be-
gin flashing. Once the LED stops flashing the InStyler
is ready to go. You must close the handle to begin the
rotation.
How do I get my InStyler to rotate?
A.
You must close the handle to start the rotation. The
rotation will start automatically.
What if my InStyler does not heat?
A.
Check to make sure your InStyler is plugged in. Press
the Power button. The LED bars should light and start
flashing. When the LED stops flashing the InStyler will
be at the set temperature and ready to use.
When I use my InStyler, why does the temperature LED
start to flash?
A.
It is normal for the heat to fluctuate during use. As
long as the InStyler has been allowed to reach full
heat (steady LED) after powering on, you can con-
tinue to use your InStyler while it is flashing.
How do I clean my InStyler?
A.
When cleaning your InStyler, disconnect it from
the power source and make sure it has completely
cooled. Wipe the outside surface only with a soft
damp cloth. Be sure to wring out all excess water be-
fore applying it to the InStyler. Clean more severe dirt
by using
a soft, damp cloth with a mild soap. Bristles
can be lightly scrubbed if necessary with a damp cloth
to remove any built up product and any residual hair
left in the bristles should be removed. The barrel can be
wiped down with a soft, damp cloth. Use a mild soap
if necessary. Make sure the InStyler is completely dry
before plugging into any power source.
