manualshive.com logo in svg

Instrutech ITC-18/PCI, Руководство пользователя

Поделиться
Скачать
Instrutech ITC-18/PCI Скачать руководство пользователя страница 9

I

NSTRUTECH 

C

ORPORATION

 

ITC-18/PCI

 

U

SER

’

S 

M

ANUAL

 

Trigger In: 

Start acquisition from an external unisolated CMOS compatible source.  
Available through a BNC connector on the front panel. .  The absolute 
maximum voltage range for this input is -0.5 volts to +5.5 volts.  

Do not 

exceed this range or damage can result to the input circuitry.

 

Trigger Out: 

Unisolated programmable trigger output. Available through a BNC 
connector on the front panel. 

Sequencer Out: 

Seven isolated programmable CMOS compatible trigger outputs.  The 
sequencer outputs are very precise triggers that can be programmed to 
toggle when a particular entry in the sequence RAM is executed.  
Available through a multi-pin connector on rear panel. 

♦

  PCI-18 Host interface: 

The 

PCI-18

 PCI interface card is a 5 volt, slave PCI host card that interfaces the ITC-18 rack unit to the 

host computer. 

The 

PCI-18

 card is compatible with version 2.0 of the PCI bus specification.

 

♦

  FIFO memory: 

Standard: 

 

1024 kilosample FIFO 

♦

  External Clock: 

Optional 12.8 megahertz external clock will synchronize multiple ITC-18 interfaces.

 

♦

  Dimensions: 

W: 19", H: 1.75", D: 10.5", Weight: 8 pounds 
W: 47.5 cm, H: 4.375 cm, D: 26.25 cm, Weight: 3.6 kg 

♦

  Power requirements: 

85-264VAC 47-440 Hz 15 Watts. 

♦

  Warranty: 

Two years parts and labor. 

 

All technical specifications are nominal conditions and are subject to change without notice. 

1.6  Description 

The ITC-18 is the second generation computer interface from Instrutech Corporation.  The 
ITC-18 offers increased capability while retaining all of the exceptional features of it’s 
predecessor, the ITC-16.  The ITC-18 advances data acquisition to a new level! 

Hardware Configuration:

  

The ITC-18 is a rack-mountable unit.  It has BNC connectors for the analog inputs 
and outputs and ribbon-cable connectors for the digital lines. 

 

9

Содержание ITC-18/PCI






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды