manualshive.com logo in svg

Instrutech ITC-18/PCI, Руководство пользователя

Поделиться
Скачать
Instrutech ITC-18/PCI Скачать руководство пользователя страница 23

I

NSTRUTECH 

C

ORPORATION

 

ITC-18/PCI

 

U

SER

’

S 

M

ANUAL

 

7  Product Upgrades 

7.1  PCI-18 adaptability 

The 

PCI-18

 card is designed to be firmware upgradable by users, should this ever become 

necessary to keep up with new developments in the specification for the PCI bus.  Do not 
attempt to do such an upgrade without the approval of Instrutech Corporation or one of its 
authorized agents.  

If this upgrade is performed improperly, the 

PCI-18

 card will 

malfunction and become unusable

. 

First you must acquire the proper upgrade software from Instrutech Corporation or one of 
its representatives.  These upgrades will be announced on the Instrutech mailing list (See 
previous section of this manual) and on our Web site.  The cover of the computer must be 
removed to access the 

PCI-18

 card in order to install a jumper.  A programming jumper 

needs to be installed across the pins labeled “WE”.  Install this shunt with the computer 
powered off.  After this shunt is installed power on the computer and run the software for 
your system.  Update software will be made available in MacOS and DOS formats.  The 
DOS program will run under Windows 3.1 and Windows 95.  Windows NT users will need 
to boot their computer in DOS mode to perform this upgrade.  After the software is run is 
should give you a successful completion message.  The computer should then be powered 
down and the jumper removed from the “WE” pins.  Close the computer and turn the 
power back on.  The update has now been completed. 

If there is any difficulty in this process, please contact your dealer. 

 

23

Содержание ITC-18/PCI






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды