11
Outputs
There are three ways to
change voltages:
1. A change in voltage at the
CV Input
.
The change in voltage must be enough
to latch to an enabled quantised note.
2. Moving the
Transpose
fader when set
to
Quantised Offset Mode
. In
Quantiser
Mode
this will move -/+2 octaves within
the enabled scale. In
Performance
Mode,
octave jumps will be applied.
3. Pressing a
Keyboard Button
in
Performance Mode
.
R CV Output:
Root chord tone output.
•
Output Range: -/+10V.
3 CV Output:
Third chord tone output.
•
This output will generate a voltage with an interval offset defined by
the
Chord Quality
parameter.
•
Output Range: -/+10V.
5 CV Output:
Fifth chord tone output.
•
This output will generate a voltage with an interval offset defined by
the
Chord Quality
parameter.
•
Output Range: -/+10V.
7 CV Output:
Seventh chord tone output.
•
This output will generate a voltage with an interval offset defined by
the
Chord Quality
parameter.
•
Output Range: -/+10V.
