![Instron AutoX Скачать руководство пользователя страница 43](http://html1.mh-extra.com/html/instron/autox/autox_operators-manual_2070121043.webp)
43
Product Support:
Chapter 5
Testing
•
•
•
Before you Begin
Before testing, verify that the system has been properly started and prepared. Refer to
the operator’s guide for your testing system (e.g. 5900 Operator’s Guide) for information
on the following:
•
Start the system.
•
Assemble the load string, including the load cell, adapters and grips required for
testing.
•
Preload the load string.
•
Set travel limit stops on the load frame.
Refer to
for instructions on setting up, adjusting and initializing the AutoX.
Running a Test
The following procedure is a checklist for running a test using the AutoX. More detailed
information on each step can be found in the operator’s guide for the testing system and
in the Bluehill
®
Reference Help online documentation.
1. In Bluehill, create a new sample. Select a test method that includes:
•
a strain measurement that is assigned to the automatic extensometer.
•
auto balance as a pre-test control parameter, with the strain measurement
included in the Selected list.
Содержание AutoX
