Instron 2630-100 Series, Справочное руководство

Страница: 6 / 66

Preliminary Pages
6 M20-52630-1-EN
Hazard - Press the Emergency Stop
button whenever you consider that an
unsafe condition exists.
The Emergency Stop button removes hydraulic
power or electrical drive from the testing system
and brings the hazardous elements of the system
to a stop as quickly as possible. It does not
isolate the system from electrical power, other
means are provided to disconnect the electrical
supply. Whenever you consider that safety may
be compromised, stop the test using the
Emergency Stop button. Investigate and resolve
the situation that caused the use of the
Emergency Stop button before you reset it.
Flying Debris Hazard - Wear eye
protection and use protective shields or
screens whenever any possibility exists
of a hazard from the failure of a
specimen, assembly or structure under
test.
Wear eye protection and use protective shields or
screens whenever a risk of injury to operators
and observers exists from the failure of a test
specimen, assembly or structure, particularly
where explosive disintegration may occur. Due to
the wide range of specimen materials,
assemblies or structures that may be tested, any
hazard resulting from the failure of a test
specimen, assembly or structure is entirely the
responsibility of the owner and the user of the
equipment.
Warnings