manualshive.com logo in svg

InStep Robin, Руководство пользователя, Страница: 6 / 28

Поделиться
Скачать
InStep Robin Скачать руководство пользователя страница 6

• 

Do not ride over curbs, bumps or holes.

• 

Do not use the trailer in hazardous weather or at night.

• 

Do not pull or push the trailer with a vehicle.

• 

This product is not suitable for running or skating.

• 

Red reflectors must be visible on the rear of the trailer

• 

Never ride a bicycle at night without adequate lighting. Obey 

all local legal requirements for lighting

RECOMMENDATIONS

•  The manufacturer recommends the bicycle to be used with the 

trailer undergo a safety check with a qualified bicycle mechanic 

before attaching the trailer. 

• 

The maximum weight that can be carried in the cabin pockets is 

1 lbs. each. The maximum weight that can be carried in the rear 

storage area is 5 lbs.

• 

Attach a rearview mirror on the bicycle to check on the (child/

children) in the trailer.

CARE

• 

To clean the trailer: use only mild soap and water. Do not use 

cleaning solvents.

• 

Routinely check that all fasteners and equipment (wheels, 

reflectors, flag, etc) are tight and properly assembled.

• 

Check the tire pressure often. The recommended tire pressure 

range is printed on the tire. Only use a foot or hand pump to 

inflate.

• 

Have a qualified bicycle mechanic perform routine safety 

checks on your bicycle before using with the trailer.  

• 

Routine bicycle maintenance is recommended to be performed 

every year.

• 

Do not leave trailer outside after use. Inclement weather and 

harsh elements may stress the fabric on the trailer.

WARNING!

3     InStep Robin Trailer

Содержание Robin





























Отзывы:

Нет отзывов