manualshive.com logo in svg

InStep Robin, Руководство пользователя, Страница: 5 / 28

Поделиться
Скачать
InStep Robin Скачать руководство пользователя страница 5

• 

Always use the crotch strap in combination with the waist belt.

• 

Do not allow any of the child’s body, clothing, shoe laces, or 

toys come into contact with a moving trailer.

• 

Take proper steps (clothing, ventilation, hydration) to protect 

the child from exposure hazards such as wind chill and heat 

exhaustion. These hazards will have a greater impact on the 

less active passenger.

TRAILER USE WARNINGS

• 

Before each ride, ensure the attached trailer does not interfere 

with braking, pedaling, or steering of the bicycle.

• 

Failure to comply with the manufacturer’s instructions can lead 

to serious injury or death of the passenger/rider

• 

Do not add a seat pad (mattress) thicker than 2.5” (63.5 mm).

• 

Parcels or accessories placed on the trailer may cause the 

trailer to become unstable. 

• 

Do not place items on the trailer. Hazardous conditions may 

exist if package carrying accessories are added to the product.

• 

This product may contain a chemical known to the State of 

California to cause cancer, birth defects, or other reproductive 

harm.

• 

Check the trailer for damage. Do not use if damaged.

• 

Be sure the fasteners are tight. Tighten if necessary.

• 

Over inflation of tires may result in failure and risk of serious 

injury. Do not exceed maximum pressure as shown on tires.

• 

If necessary inflate the tires to within the range shown on the 

tire sidewall. Always use a foot or hand pump to inflate the 

tires.

• 

The safety flag and reflectors must be in place. Do not use the 

trailer without the safety flag and reflector in place.

• 

Always have the canopy in place.

• 

Do not make any modifications to the trailer as it increases the 

risk of failure. 

• 

Accessories not approved by the manufacturer must not 

 

be used.

SAFE RIDING WARNINGS

• 

Do not install a car seat or any other seating device into the 

trailer, that is not approved by the manufacturer.

• 

Be sure the brakes work properly. Braking distance is increased 

when pulling a trailer.

• 

Avoid braking suddenly.

• 

Always maintain a safe speed. The trailer is not intended for 

use at high speeds. Do not exceed 10 MPH. 

• 

The trailer requires a wide turning radius. Do not turn sharply. 

Sharp changes in direction may cause a tip over.

• 

Use caution when turning on loose or uneven surfaces and 

when going downhill. 

• 

Allow extra clearance for the trailer when near curbs, parked 

cars, and other obstacles. 

continued on next page

WARNING!

InStep Robin Trailer       2

Содержание Robin





























Отзывы:

Нет отзывов