2
IMPORTANT
Tires are shipped deflated, DO NOT OVERINFLATE. Please inflate slowly, with short bursts, to 20-25 PSI
maximum. 25 PSI will provide a comfortable ride for your child.
We appreciate your purchase of one of our many fine products. We are sure that you will be satisfied with
your selection. We regret that although great care and effort have been taken, occasionally problems may
occur. PLEASE DO NOT RETURN PRODUCT TO THE STORE. To ensure prompt and correct handling of
problems, or to answer questions, please contact us at either our Toll-Free Customer Service Number or e-
mail us at our number listed below. Service will be quicker if you have your model number (found on the
product and box) along with this instruction sheet ready when calling. If you have any questions concerning
the safe use of this product, Please contact us 1-800-242-6110 press “1” for customer service and then “2 “to
speak to a representative or e-mail us at [email protected] or visit our web site at www.instep.net.
Elite Assembly Instructions
Model No. 11-ET100
Parts List
Description
Qty.
Frame Assembly w/seat, canopy, basket and wrist strap
1
Front Wheel Assembly with quick release axle
1
Rear Wheel Assembly with quick release axles
2
Stroller Assembly Instructions
Step 1. Unfold Stroller
Grasp handle with one hand, and pull up on the
front fork with your other hand. Lock both plastic
latches onto the lower frame (Figure A).
Step 2. Rear Wheel Assembly
Turn stroller onto it’s side, push in the black
button on the center of the hub and insert axle
into the hole in the rear frame. Pull on wheel to
ensure it is locked in place. Repeat for other side
(Figure B). To remove wheel push in black button
on hub and pull off wheel.
A
B
Latches
Lower
Frame
Front Fork
Rear Frame
Handle
Rear Frame
Rear Wheel
Push in black
button to insert
and remove
wheel
