SwitchLinc Dimmer 1000W User’s Guide
Page 29 of 36
5. Orient the new small light pipe with its protrusion facing toward
the center of the frame and snap it into place. If placed in
backwards or reversed, it will not click into place. Refer to the
diagram.
6. Orient the new large light pipe with the side that has the most
protrusions facing toward the center of the frame. Using only
finger pressure, snap the light pipe into the frame.
7. If both light pipes are installed correctly, they will
stick straight out from the back of the frame. If installed incorrectly, they will appear to be tilted as
shown in the photos.
8. Gently place the paddle assembly back onto the front of SwitchLinc Dimmer. A little force may be
necessary to snap the assembly over the SET Button. Reinstall the four screws that you removed in
Step 2.
Insert the new light pipes with the
protrusions facing the center
Installed correctly
Installed incorrectly
