INSTEON 2844-222 Скачать руководство пользователя страница 33

33

Certifications and Warnings

Read and understand these instructions before installing and retain them for future reference.

•  Each Insteon product is assigned a unique Insteon ID, which is printed on the product’s label.

This device complies with FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is 

subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device 

must accept any interference, including interference that may cause undesired operation of the device.

Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts 

de licence. L’exploitation est autorise aux deux conditions suivantes: (1) l’appareil ne doit pas produire de 

brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est 

susceptible d’en compromettre le fonctionnement.

The digital circuitry of this device has been tested and found to comply with the limits for a Class B digital 

device, pursuant to Part 15B of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference in residential installations. This equipment generates, uses, and can radiate 

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 

interference to radio and television reception. However, there is no guarantee that interference will not occur in 

a particular installation. If this device does cause such interference, which can be verified by turning the device 

off and on, the user is encouraged to eliminate the interference by one or more of the following measures: • 

Re-orient or relocate the receiving antenna of the device experiencing the interference • Increase the distance 

between this device and the receiver • Connect the device to an AC outlet on a circuit different from the one that 

supplies power to the receiver  • Consult the dealer or an experienced radio/TV technician.

WARNING: Changes or modifications to this device not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment.

Cet appareil a été testé et s’avère conforme aux restrictions relatives aux équipements numériques de classe B, 

d’après l’article 15 des règlements du Conseil supérieur de l’audiovisuel américain (FCC). Ces restrictions ont 

été instaurées pour offrir une protection raisonnable contre les interférences nuisibles au sein d’une installation 

résidentielle. Cet appareil génère, utilise et peut émettre des fréquences radio et s’il n’est pas installé selon les 

instructions, peut nuire aux radiocommunications. Toutefois, rien ne garantit que des parasites ne surviendront 

pas dans une installation particulière. Si cet appareil cause des interférences nuisibles à la réception du 

téléviseur ou de la radio, ce que vous pouvez déterminer en ouvrant et en fermant votre appareil, nous vous 

invitons à essayer l’une des mesures correctives suivantes : • Réorientez l’antenne de réception installée sur 

l’appareil qui manifeste les parasites.

• Éloignez l’appareil du composant qui reçoit les ondes. • Branchez l’appareil dans une prise de courant CA 

différente de celle du composant qui reçoit les ondes. • Au besoin, consultez votre marchand électronique ou un 

technicien spécialisé dans le service des radios/téléviseurs pour des suggestions supplémentaires.

Содержание 2844-222



































Отзывы: