Page 2 of 2
Rev. 02-02-2010
SmartLabs Limited Warranty – SmartLabs warrants to original consumer of this product for a period of 2 years from date of purchase, this product will be
free from defects in material & workmanship & will perform in substantial conformity with its Owner's Manual. Warranty shall not apply to defects caused by
misuse or neglect.
U.S. Patent No. 7,345,998, International patents pending © Copyright 2010
SmartLabs, 16542 Millikan Ave., Irvine, CA 92606, 1-800-SMARTHOME (800-762-7846)
Quick-Start Guide
INSTEON 240V Load Controller (Dual-Band)
Complete Instructions, Troubleshooting, and Tech Support
Owner’s Manual:
http://wiki.smarthome.com/index.php?title=2477SA_Manual
Call: Tech. Support @ 1-800-SMARTHOME (800-762-7846)
Contact Us Online:
http://www.smarthome.com/contactus.html
Linking 240V Load Controller as a Responder to an INSTEON Controller
1)
Select the INSTEON-compatible Controller you would like to use to control 240V Load Controller and set it to Linking Mode. (For
most Controllers, press & hold the On or Scene button for 10 seconds, or the Set button for 3 seconds.)
You will have 4 minutes to complete the next step.
2)
Press & hold the Set button on 240V Load Controller until the unit double-beeps (about 3 seconds)
The 240V Load Controller Status LED will turn on solid green if the attached load is on or solid red if the attached load is
off
3)
Test that Linking was successful by tapping the On/Off buttons on your Controller you just Linked to 240V Load Controller
240V Load Controller should respond appropriately
FCC Compliance Statement
This device complies with FCC Rules Part 15.Operation is subject to 2 conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference that may be received or that may cause undesired operation. The digital circuitry of this device has been tested
and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio and television reception. However, there is no guarantee that
interference will not occur in a particular installation. If this device does cause such interference, which can be verified by turning the device off and on, the user
is encouraged to eliminate the interference by one or more of the following measures:
•
Re-orient or re-locate the receiving antenna of the device experiencing the interference
•
Increase the distance between this device and the receiver
•
Connect the device to an AC outlet on a circuit different from the one that supplies power to the receiver
•
Consult the dealer or an experienced radio/TV technician
WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
