![Instascan FaceScan1000 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/instascan/facescan1000/facescan1000_instructions-for-use-manual_2069855008.webp)
Registered Office: Unit 17/18 Gunnels Wood Park, Gunnels Wood Road, Stevenage, Herts SG1 2BH, UK • Registered No. 4388957 • VAT No. 795788835
Installation – Gate (guide only)
According to the installation location, drill a 35mm diameter hole (as shown
in the figure below) in the required location. For a gate installation like the
one below this is normally at the middle or front side of the gate.
Single channel gate
Dual-channel gate
1. Unscrew the nut on the bottom of the gate head post, thread the
cables out of the nut and remove the nut fully.
2. Next, thread the cables through your 35mm hole you cut
previously, thread the cables through the hole, and then after fitting
the cables through the nut, use the nut to fix the post to the gate.
NOTE: the same fixing method can be used fixing the display to other
fixtures.