Registered Office: Unit 17/18 Gunnels Wood Park, Gunnels Wood Road, Stevenage, Herts SG1 2BH, UK • Registered No. 4388957 • VAT No. 795788835
Installation – Wall Mount (guide only)
1. Remove wall bracket from the box and take out the four screws provided.
2. Screw the bracket to the wall using the four screws to secure.
3. Check the bracket is fully secure to the wall and in the correct
position.
4. Finally, clip the Instascan unit to the bracket.
Care and Maintenance
•
During the installation and use of the product, all electrical safety regulations must be strictly
observed.
•
Please use the power adapter provided. For specific requirements of the power adapter, see
the product specifications table.
•
When installing on the gate, please make sure that the product is installed firmly
•
If the product does not work properly, please contact the after-sales service personnel. Do
not disassemble or modify the product in any way. (The company does not assume any
responsibility for problems caused by unauthorized modification or repair)
•
Do not immerse the product in water. When the product is installed outdoors, try to use it with
the optional rain cover provided by our company.
•
Please understand that you are responsible for properly configuring all passwords and other
related product security settings, and keeping your username and password private.
•
If the equipment does not work properly, please do not disassemble it for repair, otherwise it
will affect the equipment warranty
•
Avoid extreme environments such as high temperature areas (or low temperature), high
humidity, vibration, radiation, and chemical corrosion during installation and use.
