Instar IN-5907, Руководство пользователя, Страница: 13 / 38

/10
How to setup your Camera without a router:
If you want to connect your camera directly to your computer, please set a fi xed IP
address for the network interface in your computer, as well as for the IP camera. You
can set the camera IP by using the INSTAR Camera Tool. As for Gateway and DNS
server please fi ll in the computer IP. Aft er submitting the settings to the camera please
wait a moment until the camera has restarted. For a detailed instruction please refer to
our FAQ section on www.faq.instar.de .
EXAMPLE:
If your computer’s IP address is “192.168.178.10” then please give your camera an
IP like this “192.168.178.110”. For Subnet mask, Gateway and DNS Server please
use the same settings as for your computer (s. above). If your computer has the IP
“192.168.178.10” then the Gateway and DNS should be “192.168.178.1” and the sub
netmask is “255.255.255.0”.
For the fi rst installation of the camera please log in
with the following username and password:
Aft er the login (
Internet Explorer
) you will be asked to install the ActiveX control
element. Please run it and confi rm when your Internet Explorer is asking you to install
the control element:
4.2 THE LOGIN
4.3 PLUGIN INSTALLATION
(only Internet Explorer)
l
l
user:
admin
password:
instar
/10
How to setup your Camera without a router:
If you want to connect your camera directly to your computer, please set a fi xed IP
address for the network interface in your computer, as well as for the IP camera. You
can set the camera IP by using the INSTAR Camera Tool. As for Gateway and DNS
server please fi ll in the computer IP. Aft er submitting the settings to the camera please
wait a moment until the camera has restarted. For a detailed instruction please refer to
our FAQ section on www.faq.instar.de www.faq.instar.de .
EXAMPLE:
If your computer’s IP address is “192.168.178.10” then please give your camera an
IP like this “192.168.178.110”. For Subnet mask, Gateway and DNS Server please
use the same settings as for your computer (s. above). If your computer has the IP
“192.168.178.10” then the Gateway and DNS should be “192.168.178.1” and the sub
netmask is “255.255.255.0”.
For the fi rst installation of the camera please log in
with the following username and password:
Aft er the login (
Internet Explorer
) you will be asked to install the ActiveX control
element. Please run it and confi rm when your Internet Explorer is asking you to install
the control element:
4.2 THE LOGIN
4.3 PLUGIN INSTALLATION
(only Internet Explorer)
l
4.2 THE LOGIN 4.2 THE LOGIN
l
4.3 PLUGIN INSTALLATION 4.3 PLUGIN INSTALLATION
user:
admin
password:
instar