Model Ref No:
UCD47 [6.75kW, Optional Configuration]
Description:
Under-counter, push-button dispenser
Size (H x W x D):
560 x 465 x 500
Voltage:
220-240V single-phase 50Hz
Supply:
AC
Rated Input:
6.75Kw [Optional configuration]
Output (Amps):
30A
Fill Type:
Automatic
Max Rapid Draw-Off:
47 Litres [275 x 200ml (7oz) cups]
Recovery per Minute:
1.1 Litres
Temperature:
Adjustable between 80 - 95^C (factory-set @ 95^C)
Heat up time from Cold:
45 Minutes (to full boiler capacity)
Model Ref No:
UCB40-STA-S (Stadium)
Description:
Under-counter, push-button dispenser
Size (H x W x D):
560 x 465 x 500
Voltage:
220-240V single-phase 50Hz
Supply:
AC
Rated Input:
3.0kw
Output (Amps):
13A
Fill Type:
Automatic
Max Rapid Draw-Off:
40 Litres [200 x 200ml (7oz) cups]
Recovery per Minute:
0.5 Litres
Temperature:
Adjustable between 80 - 95^C (stadium default setting @ 85^C)
Heat up time from Cold:
85 Minutes (to full boiler capacity)
5.0 INSTALLATION
MAINS WATER CONNECTION
Your machine has been supplied with a WRAS approved non-toxic hose for connection to a suitable
drinking water supply. The water supply must have a pressure not exceeding 7 bar (96psi), and no
lower than 2 bar (28psi).
•
If your water pressure exceeds 7-bar, a suitable pressure reduction valve may need to be
fitted to the water supply to bring the pressure to a level that the machine can cope with.
•
In the unlikely event of the pressure being too low a booster pump can be supplied.
INSTANTA CANNOT BE HELD RESPONSIBLE FOR ANY MACHINE MALFUNCTION IF THE WATER PRESSURE
EXCEEDS THAT STATED. IF IN DOUBT, CONSULT YOUR WATER SUPPLY COMPANY.
The hose supplied with the machine is manufactured from materials which have been approved for
drinking water and should only be connected to a cold water supply.
•
If any hose not supplied by Instanta is used to connect the machine, the guarantee could
be invalidated and contamination may occur.
PLEASE NOTE: Washing machine hoses (usually red, black or blue,) are not suitable for drinking
water and will cause a very bad taste to the water.
A 15mm stop valve should be fitted between the water supply and the hose so that the machine
can be isolated.
Water purification filters are available to ensure fresh water. Please contact Instanta Spares for
details (01704 501114).
In hard water areas, scale can cause problems. Fitting a scale reducer will help minimise scale but
will not eliminate scale completely.