background image

Filter Age

The age of the filter (in months), can be checked 

at any time. With boiler turned off, press & hold 

both the ON/OFF and ECO buttons together 

until screen shows “FAGE” and the number of 

months elapsed (e.g. 3 = 3 months old).

Filter-Life Monitor

The filter-life monitor can also provide an 

accurate reading of how many litres remain 

before the filter-cartridge expires. With boiler 

turned off, press & hold ON/OFF button until 

screen shows “0000 LITRES”.    

7-Day Timer

The boiler can be set-up to switch ON and OFF 

using the programmable seven-day timer.

Enable 7-Day Timer: 

• 

With machine switched off, press & hold 

ON/OFF button (for approximately  

7 seconds) until Yellow screen shows  

“USER PROG”, then release button.   

• 

Advance through options until “TMDE” is 

displayed (press & hold ON/OFF button to 

select).

• 

There are three options to choose:

ALL

 – set ON and OFF times once and they 

apply to the full 7 day week.

ON

 – set the ON and OFF times separately 

for each day of the week.

OFF

 (Default) – the timer is disabled.    

• 

Press ECO button to save the required 

option.

Set-up 7-Day Timer: 

• 

Advance to next menu option “TMRS”. 

Again press & hold ON/OFF button  

(long push) to select. 

• 

Set the ON and OFF times; use ECO button 

to advance the clock in 15 minute steps.

• 

Use the ON/OFF button to save the ON  

and OFF set-times, and also to cycle 

through the days of the week (All, Sun, 

Mon, Tue etc.) 

• 

To exit USER menu, press & hold ECO 

button for 5 seconds then release  

(screen will show “WAIT” whilst the 

changes are being saved).

Overriding the Timer: 

The timer can be overridden when in the  

“timed-off” period, simply by pressing the  

ON/OFF button on the front of the boiler. If the 

timer is overridden, the boiler will remain ON 

until the next programmed “time-off” period 

occurs, or until the boiler is switched off 

manually.

 

8

Содержание CPF210













Отзывы: