Inspur OB5161M5, Руководство пользователя

Страница: 32 / 115

27
BIOS Setup
Description Table of BMC Network Configuration Interface
Interface parameter Function Description Defaults
Get BMC Sharelink/Dedicated
Parameters
Get the mode setting of the BMC management network port
parameters. The option parameters are:
Do Nothing: Do not operate.
Auto: Automatically obtain the current BMC network
settings.
Manual: Manually setting up BMC network
Do Nothing
Configuration Address Source
Configure the BMC network status parameter settings.
When Get BMC Dedicated Parameters is set to [Manual], the
option parameters are:
Unspecified: Unspecified, the BMC network parameters will
not be modified.
Static: Static BMC network parameter settings:
DynamicBmcDhcp: Dynamically obtain BMC network
parameters:
Static and dynamic network parameters take effect
immediately after successful setup.
Unspecified
Current Configuration Address Display current BMC network parameter configuration status ----
Station IP address
BMC network port IP address ----
Subnet mask Subnet mask ----
Station MAC address BMC network port MAC address ----
Router IP address BMC network port routing IP address ----
1. Set the BMC Static Network Parameters.
Set the Configuration Address source option to [Static]. After the setting is successful, it
will shown the prompt: “Set Static BMC IP Address Source Success!!”. After the setting is
successful, the BMC network will be set to static immediately as shown in the following
figure.
Select the Station IP address item and press Enter. The Station IP address box will pop up,
please manually enter the Static IP to be set. After the setting is completed, press Enter to