13
Operations
4 Operations
4.1 Power up the Server
Insert the power cord plug, then press the Power Button.
4.2 Power down the Server
WARNING:
To reduce the risk of personal injury, electric shock, or damage to the equipment,
remove the power cord to remove power from the server. The front panel Power Button
does not completely shut off system power. Portions of the power supply and some internal
circuitry remain active until AC power is removed.
IMPORTANT:
If installing a hot-plug device, it is not necessary to power down the server.
1.
Back up the server data.
2.
Shut down the operating system.
3.
Disconnect the power cords.
The system is now without power.
4.3 Extend the Server from the Rack
1.
Follow the installation guide, and loose
n
the four captive screws within the ears on both
sides by using a screwdriver.
2.
Pull out the server slowly out of the rack. Install the lifting handles on both sides. Move
the server onto an antistatic bench.
WARNING:
To reduce the risk of personal injury or equipment damage, be sure that the rack
is adequately stabilized before extending a component from the rack. A single server weighs
above 60kg and should be lifted by at least four people or by using auxiliary equipment.
Содержание NF5488A5
Страница 1: ...Inspur Server User Manual NF5488A5 ...