Inspur AS1100H Скачать руководство пользователя страница 44

Страница: 44 / 55

Chapter XVII Configure Email and SNMP Alarm

This chapter introduces how to configure email and SNMP alarm under EMW window in

STRMGR storage management software, so as to achieve the goal of remote controlling disk array

running status.

17.1

Configuration notes

1. The purpose of setting alarm is to send an email or inform management personnel via

SNMP, when there’s any severe problem in storage arrays.

2. It is required to run event monitor (integrated in management software) on one

management workstation to receive alarm messages. This machine shall be an uninterruptedly

running computer, event monitor service shall have been installed and started, and event monitor

service is called SMmonitor.

17.2

Alert notification configuration steps

1. Select Setup column in enterprise management window (EMW), click configure alerts.

2. Select a disk array to configure alerts, click ok.

If select all storage arrays, an alerts dialogue will appear.

If select individual storage array, first select a specific storage array, an alerts dialogue will

appear after clicking ok.

3. Select the needed alert information type, and click ok to complete.

17.3

Mail server tab

To set email alerts, it is required to set mail server and mail sender address.

Sender contact information is optional information, if required, fill in corresponding

information, otherwise, delete this field.

17.4

Email tab

Input email address, i.e. [email protected] according to standard format.

Users can select the additional information to send in the information to send list, such as

event+profile or event +support (including profile), which can help to know the current condition

of storage array and is convenient for fault analysis.

Содержание AS1100H
























































Результаты поиска

Содержание AS1100H

Отзывы:

Бренды по названию

Популярные бренды

Inspur AS1100H, Руководство пользователя

Результаты поиска

Содержание AS1100H

Отзывы:

Бренды по названию

Популярные бренды