Inspur AS1100H Скачать руководство пользователя страница 2

Страница: 2 / 55

Dear users of Inspur storage system:

Sincerely thank you for selection of Inspur storage system!

This manual introduces the technical characteristics and system installation, setup and usage

of Inspur storage system, and helps you to particularly understand and expediently use this storage

system.

Please deliver the package of our product to the waste recycling station for recycling, in favor

of pollution prevention and humankind’s benefit.

This manual is the property of Inspur.

This User Manual is not to be copied by any group or person in any manner without the

consent of Inspur. The Inspur reserves the right of revising this manual momentarily.

Any alteration about the content of this manual will not be noticed. We suggest that the user

shall read this manual before using Inspur storage system, so as to avoid any mistake during

operation.

Please forgive any insufficiency in details, point out and give directions for us in time.

Please contact Inspur, if you have any questions or advice about this manual.

Inspur

May. 2014

“Inspur ” is a registered trademark of the Inspur Group Co., Ltd.

Other trademarks belong to other corresponding registered companies.

Содержание AS1100H
























































Результаты поиска

Содержание AS1100H

Отзывы:

Бренды по названию

Популярные бренды

Inspur AS1100H, Руководство пользователя

Результаты поиска

Содержание AS1100H

Отзывы:

Бренды по названию

Популярные бренды